1. Before using the tool, a professional electrician should check whether the wiring is correct to prevent accidents caused by the wrong connection of the neutral line and the phase line.

2. Before using the tool for a long time without use or damp, the electrician should measure whether the insulation resistance value meets the requirements.

3. The flexible cable or cord that comes with the tool must not be long. When the power supply is far from the work place, a mobile electrical box should be used to solve it.

4. The original plug of the tool must not be removed or changed at will. It is strictly forbidden to directly insert the wire of the wire into the socket without the plug.

5. If the tool casing is found to be broken, the handle should be stopped and replaced.

6. Non-full-time personnel shall not disassemble and repair tools without authorization.

7. The rotating parts of the tool should have protective devices.

8. Operators should wear insulation protective equipment according to regulations.

9. Leakage protector must be installed at the power source.